Description
Buy Hose for asphalt and bitumen ø 75/93 mm (4.5 m) from ChemLV at a bargain price in Latvia and the European Union
Intended use Hose for asphalt and bitumen ø 75/93 mm (4.5 m) – Hose for asphalt | Asphalt Hose | Hose for bitumen | Sleeve for asphalt | Sleeve for asphalt mass | Sleeve for bitumen |
Applicable – Asphalt transportation | Bitumen transportation |
Description Hose for asphalt and bitumen ø 75/93 mm (4.5 m)
High quality pressure hose is used for pumping hot oil products such as bitumen, asphalt and oil.
Hot bitumen hoses are not suitable for continuous operation at temperatures above 200° C. They can be used briefly at higher temperatures. But this affects safety and shortens the service life.
Hoses for hot bitumen should not be bent at the junction with fittings, but in the middle. Therefore, these hoses have a significantly larger bend radius than fuel truck hoses. At high temperatures, the rubber hose becomes soft and the inner rubber loses its strength. Large bend radii will extend the life of the hose.
Do not close hot! Hot hoses must not be closed at the ends, as a vacuum is created during cooling. When cooling from 200° C to 0° C, a vacuum of more than 0.4 bar (approx. 4 m water column) is created in the closed hose line. Thus, the inner rubber may peel off.