Hose for asphalt and bitumen ø 100/118 mm (4.5 m)

Applications – Asphalt transportation | Bitumen transportation |

Delivery: 2 - 5 days
Article: 15766
Availability: In Stock
311.03€/pc.
Length: 4500 mm
Diameter: 100/118 mm

Purpose Hose for asphalt and bitumen ø 100/118 mm (4.5 m) – Hose for asphalt | Asphalt Hose | Hose for bitumen | Sleeve for asphalt | Sleeve for asphalt mass | Sleeve for bitumen |

Applications – Asphalt transportation | Bitumen transportation |

Description Hose for asphalt and bitumen ø 100/118 mm (4.5 m)

The high quality pressure hose is used for pumping hot oil products such as bitumen, asphalt and oil.

Hot bitumen hoses are not suitable for continuous operation at temperatures above 200°C. They can be used briefly at higher temperatures. But this affects safety and shortens the service life.

Hoses for hot bitumen should not be bent at the junction with fittings, but in the middle. Therefore, these hoses have a significantly larger bend radius than fuel truck hoses. At high temperatures, the rubber hose becomes soft and the inner rubber loses its strength. Large bend radii will extend hose life.
Do not close hot! Hot hoses must not be closed at the ends, as a vacuum is created during cooling. When cooling from 200° C to 0° C, a vacuum of more than 0.4 bar (approx. 4 m water column) is created in the closed hose line. Thus, the inner rubber may peel off.

Product type Tube
Length 4500 mm
Packaging Lieta
Diameter 100/118 mm
Inner diameter 100 mm
Outside diameter 118 mm
Type Tube
Manufacturer Fagumit/Optimit
Country Poland
Reinforcement Yes
Color Black